Your Product - essentiel b SP40 Notice D'utilisation

instructions
BEFORE USING THE UNIT FOR THE FIRST TIME, PLEASE READ THESE SAFETY INSTRUCTIONS
CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE.
Warning
1. Keep out of reach of children.
2. The LEDs are not replaceable: at the end of their life, please return the product to your local waste
disposal centre or to a recycling centre.
3. Do not modify the product.
4. Do not place heavy objects on the photo studio.
5. Do not place the product near a water outlet or on any surface that may be splashed with water.
6. For any maintenance operation to be performed on the product, please disconnect the kit from the
power supply.
7. Do not immerse the product in water or other liquids.
8. Do not use fluids or solvents to clean the units.
9. Keep the product away from heat sources.
10. Do not expose to high temperatures (> 45°C).
11. Regularly check the condition of the power cable and plugs. If the power cable is damaged, ensure
that it is replaced by the manufacturer, its representative or a similarly qualified person, to avoid
danger or injury.
12. Using a damaged power cable may cause fire or electric shock.
13. Do not use damaged, broken or modified power cables. Also, do not use power cables that have
been trapped under heavy objects, pulled tightly, or severely bent. This could result in fire or electric
shock.
14. Unplug the power cable from the wall outlet when not in use and before disassembling the product.
15. The power cable supplied is for use with the product only; do not use it with other devices.
16. Do not use solvents such as petrol or alcohol, or any abrasive sponges or products for cleaning.
17. Avoid any impacts or excessive vibration of the photo studio.
18. Keep all plastic bags out of the reach of children or animals.

your product

Contents of the box
• 1 folding mini photo studio
• 5 coloured non-woven polyester backgrounds: white, black, red, green, blue
• 2 pairs of wall mountings
• 1 power supply cable (1.5 m)
• 1 carrying case
• 1 quick guide
NOTE: Check that the photo studio and the power cable with the controller have not been damaged in
transit. Do not use the product if it is damaged. While installing the product, ensure that it is not plugged
in.
4
V.1.0
instructions