Samsung SCC-B2311 Manuel D'utilisation page 21

① Power Port
Port that is connected to the power (adaptor) cable.
- For SCC-B2311, SCC-B2310 and SCC-2311P
Connects to AC 24V or DC 12V.
- For SCC-B2011P
Connects to AC 230V.
② Power Indication LED
If properly supplied with power, the LED turns on.
③ Vertical Synchronization Phasing Switch (Left)
Used to adjust the vertical synchronization phasing. If pressed,
the vertical synchronization moves to the left.
④ Vertical Synchronization Phasing Switch (Right)
Used to adjust the vertical synchronization phasing. If pressed,
the vertical synchronization moves to the right.
⑤ FUNCTION SWITCH-1
1) SW1 (L/L) :
If set to OFF, it operates in the internal synchronization
mode and if set to ON, it operates in the power
synchronization mode. If multiple cameras are connected
to such as a sequential switcher in auto switch mode, the
1. L/L
2. ELC
3. FL(Flickerless)
4. LSS
User's guide
E
21