6. Tighten the lap belt and diagonal shoulder belt, then
All manuals and user guides at all-guides.com
place the red safety clip
belt tongue as near to the vehicle anchor point as
possible without touching it! (5.9, 6.1, 6.2 y 6.3).
Make sure the vehicle's safety belt is not twisted,
also check that the seat cover does not impede the
movement of the vehicle's safety belt or prevent
the installation of the seat in any way. To release
your child unbuckle the vehicle safety belt as
described in the instructions.
Ensure that the belt has no slack.
6. INSTALLING THE RED SAFETY CLIP
1. Tighten the lap belt and diagonal shoulder belt, then
place the red safety clip
belt tongue as near to the vehicle anchor point as
possible without touching it! (6.1, 6.2 y 6.3).
7. ADJUST THE HARNESS TO THE HEIGHT OF THE CHILD.
Fastening & Unfastening the harness
1. Join the 2 buckle metal connectors, pass both
connectors through the slot in the upper part of the
buckle until you hear a "click" (7.1).
2. To unfasten the harness press the red button on the
buckle downwards (7.2).
Loosening the harness
3. Release the buckle by sliding the red
downwards and at the same time pulling out the
harness (7.3).
34
Child restraint system
IMPORTANT
N
on the diagonal shoulder
N
on the diagonal shoulder
F
button
IRBAG TOP PLUS