Kubota 55213 Mode D'emploi page 5

ASSEMBLY
1
5
1. Insert the pole of big wheels into the corner protection.
2. Upside down the tank.
3. Put the corner protection with the big wheels on the pedestal. Note: "L" (it
means left) in pedestal corresponding to the "L" on the corner protection. "R"
(it means right) in pedestal corresponding to the "R" on the corner protection.
4. Put the screw into the hole. Use the screwdriver rotary the screw that makes
the two big wheels.
5. Put the front corner protection on the pedestal.
6. Put the screw into the hole. Use the screwdriver rotary the screw that makes
7. Insert the wheels into the hole of corner protection.
8. OK for all wheels and corner protection.
55213 12 Gallon Wet & Dry Vacuum
2
6
3
7
4
8
ENGLISH
5