Important - Aramsco Hepa Syclone Sentry X4 Manuel De L'utilisateur

Fig. B: Control Panel Details (top view)
Circuit breaker
reset switch.
On/Off switch.
containment techniques.
Mold Remediation
Most mold remediation projects require containment.
Containment prevents the spread of mold spores and other
bioaerosols. Only a professional with the appropriate training
should attempt mold remediation.
Other uses: The Syclone Sentry X4 can be used in a wide
variety of situations, including dust abatement, fire damage
remediation, jobsite ventilation, positive or negative air setups
for contamination cleanup and cleanroom environments, and
general air scrubbing. Use in institutions, schools, hospitals,
long term care facilities, construction and remodel job sites—
anywhere that that professional grade air quality control is
needed to improve and protect indoor air quality and guard the
health and safety of workers and occupants.
IMPORTANT: Many of these applications can present
significant health risks and require professional training. For
more information about using the Syclone Sentry X4 for
restoration and remediation projects, consult the IICRC at 360-
693-5675 or visit www.IICRC.org.
NOTICE! Because federal, provincial and local laws and
regulations have varying requirements for the application,
testing and general use of equipment on asbestos
Fig. C: Replacing the prefilter
07-02365B CFM400-ARM
abatement projects, Aramsco cannot warrant the use of
any product we manufacture for asbestos abatement.
Contractors performing abatement work should evaluate
tools, equipment and procedures in light of their local
regulatory requirements, and comply with those
requirements.
WARNING: BREATHING HAZARD
When using the Syclone Sentry X4 in a containment
area, turn off all sources of power to open
combustion appliances such as fireplaces, boilers,
furnaces, water heaters and HVAC systems to avoid
the risk of backdrafting deadly carbon monoxide fumes.
The prefilter should be replaced
whenever the accumulation of dust
is visible.
1. Lift out the prefilter and
discard.
2. Insert new prefilter. Ensure that
the retention ring snaps
securely into place.
3. The unit is now ready for use.
2
Change filter light.
Power outlet.
Aramsco