Aramsco Hepa Syclone Sentry X4 Manuel De L'utilisateur

Syclone Sentry X4 HEPA Air Scrubber
The Syclone Sentry X4 is a portable filtration system that draws air in from the surrounding environment and
passes it through an advanced filtration system. The unit removes airborne particles such as dust, mold spores,
pollen, pet dander and other debris.
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
WARNING
WARNING! Do not alter or modify your Syclone Sentry X4
in any way. Use only replacement parts authorized by
Aramsco. Modifications or use of unapproved parts could
create a hazard and will void your warranty. Contact your
authorized Aramsco distributor for assistance.
WARNING! Electric shock hazard, rotating fan,
hot surface hazards. Unplug unit before opening
cover for cleaning or servicing. Unit must be
grounded.

Inspect the power cord before use. If cord is damaged, do
not use. Always grasp the plug (not the cord) to unplug.

Plug cord into an electrically grounded outlet. Do not use
adapter. Never cut off ground prong. Do not use an
extension cord.

FOR PARTS AND SERVICE CALL YOUR LOCAL
ARAMSCO DISTRIBUTOR OR ARAMSCO AT
800-767-6933. ARI Holding Corp. 1480 Grandview Ave.,
Paulsboro, NJ 08066
If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Fig. A: Parts Identification
Blower housing.
Air inlet. Accepts
12 in. ducting.
07-02365B CFM400-ARM
Owners Manual
Model CFM400-ARM
ARI Holding Corp
1480 Grandview Ave., Paulsboro, NJ 08066 800-767-6933
Patents: http://www.LBpatents.com
Electrical box
cover (See Fig. B).
Release both buckles
to separate housings
and access HEPA filter
(see Fig. D).
WARNING
a) Do not operate any fan with a damaged cord or plug.
Discard fan or return to an authorized service facility for
examination and/or repair.
b) Do not run cord under carpeting. Do not cover cord with
throw rugs, runners, or similar coverings. Do not route cord
under furniture or appliances. Arrange cord away from traffic
area and where it will not be tripped over.
INTRODUCTION
The Syclone Sentry X4 uses a combination of airflow and
filtration to create cleaner air. The unit draws air through two
types of filters – a pre-filter and a HEPA filter. The first stage of
filtration captures larger particles. The second stage of filtration
captures much smaller particles down to 0.3 microns.
HEPA APPLICATIONS
Water Damage
Use of the Syclone Sentry X4 within the affected area will
reduce particle levels during the restoration process. In a
standard Category 1 water damage situation, place the
Syclone Sentry X4 in the middle of the affected area. Category
2 and 3 water damage situations may require negative
pressure containment and other precautions. Only
professionals with the appropriate training should use
1
Filter housing.
Filtered air
outlet. Fits
12 in. ducting.
Aramsco