Klarstein ELIZABETH Mode D'emploi page 34

EN
34
Setting the end time
If an end time is set, the oven is automatically switched off at this time.
• Press the [M] key until the following symbol flashes on the display:
• Press the [+] or [-] button to set the end time. Wait briefly. If the symbol
flashing, the set time has been accepted.
• Then set the desired temperature and function.
• When the set time has elapsed, the oven stops. The alarm sounds and the
symbol flashes. Press the [+], [-] or [M] button to cancel the alarm. If you do not
press any key, the alarm will go off after 2 minutes.
• When the oven goes out, the display returns to the current time.
• Turn the Function Knob to the [0] position to turn off the oven.
Setting the cooking time and end time
When you use this function, the oven starts at a certain time, runs for a certain time, and
then goes out automatically.
Example: It is now 10 o'clock and you want the apple pie to be ready by 15 o'clock.
The cooking time is 60 minutes. In this case, the oven starts automatically at 14 o'clock,
runs for 60 minutes and stops automatically at 15 o'clock.
• Press the [M] key until the following symbol flashes on the display:
• Press the [+] or [-] buttons to set the cooking time. Wait briefly. When the icon
stops blinking, the set time has been taken.
• Press the [M] key until the following symbol flashes on the display:
• Press the [+] or [-] button to set the end time. Wait briefly. If the symbol
flashing, the set time has been accepted.
• Then set the desired temperature and function.
• The oven starts automatically at a certain time, depending on the cooking time
entered, and then runs to the entered end time.
• When the time has elapsed, the oven stops. The alarm sounds and the icons
and flash. Press the [+], [-] or [M] button to cancel the alarm. If you do not press
any key, the alarm will stop after 2 minutes.
• Turn the Function Knob to the [0] position to turn off the oven.
stops
stops