Team Orion Advantage One 405 Mode D'emploi page 5

Masquer les pouces Voir aussi pour Advantage One 405:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

 When the charger enters peak detection mode (battery
almost full) the green LED flashes.
 Once the charge is completed, the green LED will
remain lit.
 Disconnect the battery once the charge has completed
CHARGING LIPO BATTERIES
 Connect the battery to the charger using the charge
lead connectors.
 Connect the battery balancing plug to the appropriate
balance port (LiPo charge cannot work without balan-
cing).
 Use the + and – key to adjust the charge current.
 Press and hold the LIPO key until the red LED lights
solid and the fans start spinning, charge has started.
 When the charger enters CV charge mode (battery
almost full) the green LED flashes*.
 Once the charge is completed, the green LED will
remain lit.
 Disconnect the battery once the charge has completed
Note: You can stop the charge process at any time by
pressing the Nixx or LiPo start/stop button.
*Depending on the batteries balance status, CV mode can
take a lot of time to complete.
www.teamorion.com
STORING THE BATTERIES
We recommend storing the batteries about 50% charged,
not full or empty. To achieve this when the battery is empty,
you can start a charge cycle and stop the charge after a
period of time equivalent to half the full charge time for
your battery. For example a 4000mAh battery charging at
4A, stop the charge after 30 minutes.
ERROR LED DISPLAY
 Red LED flashing when charging
Battery voltage error, battery polarity error, balancing error
or input voltage error.
 Red and green LED flashing when charging
Charger overheating, let it cool down and improve airflow.
WARRANTY
Team Orion guarantees this product to be free from
manufacturing and workmanship defects. The warranty
does not cover incorrect installation, components worn by
use, or any other problem resulting from incorrect use or
handling of the product. No liability will be accepted for any
damage resulting from the use of this product. By the act
of connecting and operating this product, the user accepts
all resulting liability.
English - 5

Publicité

Table des Matières
loading

Table des Matières