Work Area Safety; Electrical Safety - Greencut PP560L Manuel D'utilisation

44

WORK AREA SAFETY

• Do not operate this machine in explosive atmospheres, such as in the presence of flammable liquids, gases or
dust. Power tools create sparks that can ignite the dust or fumes.
• When you are working on streets, roads or nearby areas, check that it does not endanger traffic.
• Keep bystanders, children or animals away while operating this machine. Distractions can cause you to lose
control.
• Keep the work area clean and work only with sufficient lighting. Messy and dark areas can cause accidents.
MAINTENANCE, TRANSPORTATION AND STORAGE SAFETY
• Carry out maintenance of the machine. We recommend that maintenance and repairs not described in this
manual be carried out by the Authorised Service Centre.
• Ensure that the cutting blade is installed correctly and securely fastened and replace the cutting blades or any
other part that is cracked, chipped or damaged.
• Keep handles dry and clean. Dirty grips can cause a loss of control.
• Avoid accidental starting of the machine. Make sure the switch is in the "OFF" position before picking up or
transporting the machine. Transporting power tools with the switch in the "ON" position can put your safety at
risk and cause accidents.
• Disconnect the battery from the machine before making any adjustments, cleaning or storing the machine.
• When transporting or storing the hedge trimmer, always attach the cutting device cover.
• Store the product with the battery disconnected and keep it out of the reach of children.

ELECTRICAL SAFETY

• Never modify the plug in any way. Unmodified plugs and matching bases will reduce the risk of electric shock. If
you discover any damage, send your machine to Authorised Service Centre.
• Do not open or attempt to repair the battery or battery charger.
• Protect the battery and charger from moisture. Keep the battery away from extreme heat and cold.
• Charge the battery only at an ambient temperature (surrounding air) between 0ºC and 40ºC.
• Do not use the cable to carry, lift or unplug the charger. Keep the cable away from heat, oil, sharp edges or
moving parts. Damaged or tangled cables increase the risk of electric shock.
• Do not operate the battery charger outdoors.
• Disconnect the charger from the power source when not in use or before cleaning and repairing. Take special
care with the battery.
• Store the battery in a dry place between 10ºC and 30ºC when not in use.
• This battery is sealed and liquid should never come out of it. If the seal breaks down and the liquid touches
your skin quickly wash with plenty of soap and water, neutralize the liquid with a weak acid such as lemon or
vinegar and seek medical assistance urgently. If battery fluid touches your eyes, rinse thoroughly with water for
10 minutes and seek immediate medical attention.
• The battery should be recharged when it does not produce enough power in jobs that were easily done before.
Do not continue to use the product with your battery exhausted.
• The battery is not fully charged at the factory, before you try to use it, charge it completely first.
SERVICE
• Have the machine checked periodically by a qualified technician using only original spare parts. If you have any
questions, please contact the Authorised Service Centre.