UBSAN Zino PRO Guide De Démarrage Rapide page 8

Takeoff: After arming the motors, release the joysticks. Smoothly
and slowly pull the throttle upwards to take off.
Auto Takeoff / Land / Return To Home
Auto Takeoff
Aircraft LED Indications
Zino PRO has 4 LEDs; the fore / frontal LEDs are blue and the rear
LEDs are red. The LED status indications are defined as follows:
Function
Power On And
Start Up
Horizontal
Calibration
Compass
Calibration
Flight mode
Low Power
Headless
Mode
Return To
Home
Photo
Video
Flight Control
Connection
Status
Calibrate Compass 1
Calibrate Compass 2
Auto Land
LED status indication
All 4 LEDs flash slowly
All 4 LEDs flash slowly
LEDs flash in vertical pairs, alternately
All 4 LEDs flash simultaneously
All 4 LEDs are solidly lit
Fore / frontal blue LEDs stay solidly lit and
the rear red LEDs flash rapidly
Fore / frontal LEDs are solid blue and rear
red LEDs flash alternately
Fore LEDs are solid blue and rear LEDs
slowly flash red
Rear red LEDs flash once
Rear red LEDs flash alternately
When the aircraft is not connected to a
transmitter or has been disconnected
from a transmitter, the fore LEDs will
flash blue. Upon connection with a
transmitter, the fore LEDs will turn solid.
05
Return To Home