Connecting Devices - UBSAN Zino PRO Guide De Démarrage Rapide

Transmitter Cable Connection

Connecting Devices

1. Open X-Hubsan APP, select aircraft model.
2. Long press the power button on the aircraft.
3. Long press the power button on the transmitter, connect
the transmitter and the mobile device with the adapter cable.
Not connected
Before Pairing
4. Open the binding mode (this step is only needed when binding
for the first time or switching to a different transmitter. Must be
done manually). N 0 0 . 0 0 0 0 0 0 0 , E 0 0 0 . 0 0 0 0 0 0 0
S p e e d 0 . 0 m / s
H : 0 . 0 m
4 5 . 8 7 7 5 0 3 , - 1 0 6 . 1 2 3 9 8 4 ， 6 5 m
1) Go to APP settings - transmitter, transmitter connection method:
Leas
Controls
2) Select "Set the Connection Between the Transmitter and the
Aircraft" to search for the aircraft
3) Short press the power button of the aircraft 3 times to enter
binding mode
4) Select the detected aircraft and establish a connection
®
A compartment for extra cables
E: 0 % R : 0 %
T : 0 % A : 0 %
D : 0 . 0 m
P i t c h 0 ° Ro l l 0 ° Ya w 0 °
Transmitter model
Transmitter connection
Set up transmitter connection to aircraft
Transmitter hardware version
Transmitter firmware version
03
Not connected
After Pairing
N 0 0 . 0 0 0 0 0 0 0 , E 0 0 0 . 0 0 0 0 0 0 0
S p e e d 0 . 0 m / s
H : 0 . 0 m D : 0 . 0 m
4 5 . 8 7 7 5 0 3 , - 1 0 6 . 1 2 3 9 8 4 ， 6 5 m
Bluetooth
E: 0 % R : 0 %
T : 0 % A : 0 %
P i t c h 0 ° Ro l l 0 ° Ya w 0 °
Leas