Asus ROG Spartha Mode D'emploi page 6

To update your wireless receiver/charging dock firmware:
1. Launch ROG Armoury.
2. Connect the micro USB cable to your wireless receiver/charging dock.
3. Click Next on the popup window to start the firmware update.
NOTE: The popup window will only appear if there is a new firmware update available.
IMPORTANT! When you encounter a problem while updating the firmware, unplug the micro USB
cable, then press and hold down the Pair button on the wireless receiver/charging dock and replug
the micro USB cable to restart the update.
Replacing the switches
NOTE: Refer to www.asus.com for the list of compatible switches.
If you want to replace the switches, follow the steps below:
1. Remove the four (4) screws and set it aside.
2. Remove the top cover.
3. Replace the switches.
IMPORTANT!
• Ensure to install the switch into the switch socket with its button facing the front of the mouse.
• Ensure that the switches are seated properly in the switch sockets.
4. Place the top cover and secure it with the four (4) screws.
6
Mouse switches
Switch
socket
Switch
socket
Quick Start Guide