Rear Panel; Remote Control - PURE DAP-601ES Manuel D'utilisation

Rear Panel

PURE DAP-601ES
by VideoLogic
Made in the UK
1. The six main outputs — Front Left (L), Front Right (R), Surround Left (SL), Surround Right (SR), Centre (C) and Sub (SW) feed audio signals
to the matching inputs on your MCP-601ES multi-channel power amplifier.
2. AUX, VCR and TV inputs accept signals from stereo analog sources.
3. S/PDIF inputs. Optical (Toslink) and coaxial digital inputs. Connect the digital outputs of your DVD player or other sound source to these
inputs.
4. Power socket and fuse holder with spare fuse.

Remote Control

Input
Input Power
Power
Mute Test
Mute
Balance Delay Pro Logic II
Test
Acoustics EQ on/off EQ setup
Balance
Preset 1 Preset 2 Preset 3
Delay
Save
Preset 4 Load
Pro Logic II
Acoustics
Bass Manager Centre
EQ on/off
SL/SR SUB
EQ setup
Volume Delay
DRC
Preset (1-4)
Reset
Save
Load
Bass Manager Switches between four bass configurations
Centre
SL/SR
SUB
DRC
Volume +/–
Delay +/-
Reset
4
AUX VCR TV
L SL C L L
R SR SW R R
OUTPUT INPUT
Selects from the 5 different source inputs
Turns the unit on or returns it to standby mode
Mutes all channels (toggle on/off)
Outputs a test signal for left, right, centre and surround channels
Sets the volume level for each of the 6 channels
Enables time delay adjustment for your surround and centre speakers
Selects from 4 different surround settings
Selects from 6 different sound fields
Enables/disables EQ settings
Enables adjustment of the 5 EQ band settings
Selects from 4 presets
Stores your settings to a selected preset
Applies the settings stored in selected preset
Activates/deactivates the centre channel speaker
Activates/deactivates the surround speakers
Activates/deactivates the subwoofer
Select from 3 dynamic range compression ratios
Increases/decreases the output volume
Increases/decreases the delay time
Resets the unit to the factory default settings
L
S/PDIF
R