Getting Started; About The Remote Control - Boston i-DS3 plus Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
E
N
G
L
Using i-DS
I
S

Getting Started

H
Once your i-DS
subwoofer
setting to start.)
i-DS
3 plus
When your iPhone/iPod is docked in the i-DS
>
controls

About the Remote Control

Turns the i-DS
Starts play, or pauses play, of your iPhone/iPod.
Press to increase sound volume. Press and hold for faster adjustment.
Press to decrease sound volume. Press and hold for faster adjustment.
Press to mute, or un-mute the sound. When the sound is muted the light on the main
power button blinks.
Press once to skip to the next track. Press and hold to scan forward within a track.
Press once to return to the beginning of the current track. Press twice to skip to the
beginning of the previous track. Press and hold to scan backward within a track.
Turns the video output on or off.
Turns the repeat track feature on or off.
Turns the shuffle track feature on or off.
Turns the wide stereo feature on or off. When wide stereo is active, the button on the main speaker is lit.
note: When you unpack your remote control there will be a plastic insulation tab extending from the battery
compartment. Pull out this tab before using the remote control.
6
3 plus
3 plus
is set up and plugged in, turn on the power switches on the back of the main speaker
w
. Turn the subwoofer volume control
Controls
,
{
}
,
,
and
work as they usually do.
3 plus
on or returns it to standby mode.
=
up about half way. (You may want to adjust this later, but use this
3 plus
. Use the "+/–" buttons to adjust the volume. The iPhone/iPod navigation
+/– Increases or decrease the volume level.
On/Off Button – The button is lit when the
3 plus
i-DS
is on. The button blinks when the
sound is muted.
wide stereo Button – Activates the Wide
Stereo effect. The button is lit when the
effect is active .
7
and the

Publicité

Table des Matières
loading

Table des Matières