SPORTSTECH F50 Mode D'emploi page 72

Click the " " floating button, the treadmill will appear two restarts and stops for the user to select;
No operation in three seconds, this floating window is automatically closed.
Start of runway mode:
• Adjust the movement parameters required for the treadmill by sliding up and down. Press the
start button, the treadmill will automatically start after "3, 2, 1, GO".
• During the movement, the speed and incline can be adjusted by the button on panel and or the
floating window button;
• Adjust the treadmill parameters by
mill will pop up
made a selection, click the back button in the upper right corner to return to the main interface
to operate other operations. After the user selects, click on any sport mode in the sports center
interface. Will return to the runway mode interface;
Press The treadmill is restarted at the lowest speed
Press The treadmill stops, popping up the current sports scores.
, the treadmill will slow down and stop running, the tread-
and for the user to choose.When the user has not
72