Drill Safety Warnings; Additional Safety Warnings; Before Use - BOHELL TP710REA Mode D'emploi

power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
- Do not use the power tool if the switch does
not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous
and must be repaired.
- Disconnect the plug from the power source
and/or battery pack, if detachable, from the
power tool before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
- Store idle power tool out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are dan-
gerous in the hands of untrained users.
- Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power
tool's operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
- Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
- Use the power tool, accessories and tool
bits etc in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation.
- Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unex-
pected situations.
SERVICE
- Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer's liability null and void.

DRILL SAFETY WARNINGS

- Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
- Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
- Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord. Cutting accessory con-
tacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.

ADDITIONAL SAFETY WARNINGS

- Do not use the appliance if the cable or plug is
damaged.
- Ensure that the voltage indicated on the rating
label matches the mains voltage before plug-
ging in the appliance.
- Connect the appliance to a socket that can
supply a minimum of 10 amperes.
- Do not touch the plug with wet hands.
- Do not use the appliance if its accessories are
not properly fitted.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- This appliance is for household use only, not
professional, industrial use.
- This appliance is not a toy. Children should be
supervised to ensure that they do not play with
the appliance.
- Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
DESCRIPTION
A Variable speed button
B Start-up switch
C Locking button
D Rotation direction switch
E Drilling / Impact drilling selector
F Drill Chuck
G Auxiliary handle
H Depth stop
I Cooling vents
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all the product's packaging has
been removed.
- Ensure that the voltage indicated on the rating