This symbol means that user must
to consult safety warnings and
instructions thoroughly before use.
This symbol means warning
This symbol means that tool is
class II
This symbol means that in case
you wish to dispose of the product
once its working life has ended,
take it to an authorised waste
agent for the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
This symbol means that product
may include a battery or batter-
ies; user must to remove them
before disposing of the product.
Remember that batteries must
be disposed of in duly authorised
containers. Do not dispose of
them in fire.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
- CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
- To remove the batteries, once the life of the
appliance, proceed as follows:
- Open the handle of the appliance, removing the
holding screws
- Identify the battery wires and cut them (Red and
Black). To avoid risks of a short circuit with a
possible residual battery load, first cut the Red
wire and protect it by using insulating tape, then
proceed to cut the black wire proceeding in the
same way. (Fig.6).
- Safely remove the battery from its housing.
DECLARATION OF CONFORMITY
We hereby declare, under our own responsibility,
that the
products described in this ma-
nual
comply with the following standards:
EN 60745-1, EN 60745-2-2, 55014-1, EN 55014-
2, EN 61000-3-2, EN 61000-3-3 and EN 62321
in accordance with EU Directives 2006/42/EC,
2014/30/EU and 2011/65/EU.
Signed
A. Martí i Vergé
Av. Barcelona s/n
Oliana, 21/03/2018
25790, Lleida SPAIN