ADJUSTABLE WOODEN SHELVES
Adjusting and removing the shelves
For easy access to the storage content, you must pull the shelves approximately 1/3 of
its depth out of the rail compartment. These wine cabinets, however, are designed with a
notch on each side of the shelf tracks to prevent bottles from falling.
• When removing any of these shelves out of the rail compartment, tilt the shelf as
per the diagram and simply pull out, or push in the shelf until it sits on the support
brackets securely.
• Shelf installation: According to below instruction drawing to push in the shelf
alignment with two sides of sliding roller following the arrow mark .
Einlegen und Herausnehmen eines Regals:
• Shelf taking: According to the below instruction drawing to press one side of shelf
support bracket (1) extract and remove the shelf from the other side of support
bracket (2).
• Then take off the shelf following the arrow mark (5). Shelf installation will be
opposite with shelf taking.
A shelf support
bracket
B shelf
EN
31