Door Reversal - Samsung DV5471A Serie Mode D'emploi

DOOR REVERSAL

1. Unplug the power cord.
2. Remove the two hinge
screws from the door.
3. Remove the door by
lifting it.
4. Remove the two screws from
the lever-holder and then remove
the screw on the opposite side
from the lever-holder.
5. Assemble the lever-holder using
the screws that were removed
from the lever-holder-in Step
4 and then fasten the screws
marked by the circle in the figure
to the opposite side from the
lever-holder.
6. Remove the two screws
from the Frame-Front.
7. Fasten the screw into the
hole on the other side.
8. Remove the 2 Cushion-
Cover(F)s from the
bottom.
9. Remove the 15 screws.
10. Remove the Holder-Glass.
11. Turn the Holder-Glass
upside down and remove
the 8 screws.
12. Remove 2 Support-
Hinges and the Hinge-
Door
13. Remove the screw, insert
the removed screw into
the bottom hole, and then
fasten it.
14. Assemble the Support-
Hinges and the Hinge-
Door that you removed in
Step 12.
15. Fasten the 8 screws that
you removed in Step 11.
16. Install 2 Guide-Holder
Glasses onto the other
side.
17. Assemble the Holder-Glass
by sliding it so that the
upper hook is caught and
fasten the 15 screws that
you removed in Step 9.
installing your dryer _23