Weight Only Operation; Start Measuring; First Measurement; Daily Measurement - Cresta CBS 370 Mode D'emploi

Start Measuring

Weight Only Operation

Your Body Fat Analyzer will operate as a conventional
Cresta
weight - reading scale. No special programming steps are required.
Once the scale is initialized, as previously described, you may simply step on
the scale to measure your current weight. For only weight reading.
1. Position the scale on a flat, hard surface. Carpeted or uneven floors may
affect accuracy.
2. Step onto the scale platform and remain still while the scale computes your weight.
3. The scale will display your weight value.
4. The scale will automatically turn off after a few seconds.

First Measurement

Please process the user setting before your first measurement.
(Refer to Set Up Your Profile for more details)
STEP 1: Step on the platform barefooted.
STEP 2: Stand still and keep full contact with the scale until the LCD stops displaying
moving body fat level.
10
STEP 3: Then the measuring results will be displayed sequentially three times:
Body Fat, Total Body Water, Muscle Mass, Bone Mass,BMI and Calorie.
* If it fails to complete the analysis, the LCD will only display the weight data.
(To find out the solutions, please refer to Troubleshooting for more details.)

Daily Measurement

With original SENSE ON patent technology, CBS 370 will switch on as you step on
the platform barefooted.
Stand still and keep full contact with the scale until the LCD stops displaying
moving body fat level.
Start Measuring
11