Safety Symbols - Rupes MX 800 Manuel D'instructions

MIXER
INSTRUCTION MANUAL
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
SPECIFICATIONS 800W
Power Input
Voltage
Output (N-m)
Number of Gears
No Load Speed
Protection
Coupling Thread
Mixing Paddle Max.
Diameter
Electronic Speed
Control
Weight
A-weighed noise level
Sound pressure level
Hand-Arm-Vibration
SAFETY INSTRUCTIONS FOR ELECTRIC
STIRRER MACHINES
WARNING Read and understand all instruc-
tions. Do not attempt to use the tool until you
have read thoroughly and understand the opera-
tor's manual completely. Pay close attention to
the safety rules including Dangers, Warnings and
Cautions. If you use this tool properly and only for
what it is intended. Failure to follow all instruc-
tions listed below may result in electrical shock,
damage to drilling system and even personal
injury.
WARNING The purpose of safety symbols is
to attract the user's attention to possible dangers.
The safety symbols and the explanations with
them deserve your careful attention and under-
standing. The safety warnings do not by themsel-
ves eliminate any danger. The instructions or
warnings they give are not substitutes for proper
accident prevention measures.
1100W
800W 1100W
230V / 50Hz o 115V / 60 Hz
9,8 13,48
1 1
750 250~700
Double Insulation / Class 2
M14 - 2.0
105 mm 120 mm
√
2,9 kg 3,6 kg
82db(A) 84db(A)
94db(A) 96db(A)
0.4m/s 0.7m/s
2
English
1300W
1300W
14,7
2
150~400/250~700
140 mm
√
4,1 kg
85db(A)
97db(A)
1.5m/s
2 2

SAFETY SYMBOLS

CAUTION: indicates a potentially hazardous
situation which, if not avoided may result in minor
or moderate injury. It may also be used to alert
against unsafe practices that may cause proper-
ty damage.
DANGER: indicates an imminently hazardous
situation which if not avoided will result in death
or serious injury.
WARNING: indicates a potentially hazardous
situation which if not avoided will result in death
or serious injury.
BEFORE USING THIS TOOL
WARNING: Some dust created by the power
sanding, sawing, grinding, drilling and other con-
struction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
- Lead from lead-bases paints,
1600W
1600W
28
2
180~350/280~550
160 mm
√
5,6 kg
89db(A)
101db(A)
0.5m/s
2
9