The Disposable Lamp Cartridge; Silk'n Sensepil™ Intended Use; Safety With Silk'n Sensepil - Silk-n SensEpil Mode D'emploi

An AC cord
This User' s Manual
An Instructional DVD

1.3. The Disposable Lamp Cartridge

The Silk'n SensEpil™ all-purpose DISPOSABLE LAMP CARTRIDGE can fire a limited and pre-set
number of light pulses (regardless of the energy level of these pulses).
For your information - A complete series of full-body treatments typically require 5,000-7,000 light pulses.
2. Silk'n SensEpil™ Intended Use
Silk'n SensEpil™ is intended for removal of unwanted hair.
Silk'n SensEpil™ may be used to remove unwanted body hair.
Ideal body areas for Silk'n SensEpil™ use include the underarms, bikini line, arms, legs, back shoulders and chest.

3. Safety with Silk'n SensEpil™

With Silk'n SensEpil™ Safety Comes First.
HPL™ technology in Silk'n SensEpil™ - Superior safety with lower energy level: Home Pulsed Light™
technology is able to achieve long-term hair removal results at a fraction of the energy level used in other
light-based hair removal equipment. The low energy used in Silk'n SensEpil™ reduces its potential to cause
harm or complications, and contributes to your overall safety.
Silk'n SensEpil™ protects your skin: Light based hair removal is not suitable for naturally darker skin
tones or tanned skin. Silk'n SensEpil™ comes with a built-in SKIN COLOR SENSOR that is designed to
measure the complexion of the applied surface and enable application only on suitable skin complexions.
This unique safety feature will not let you treat where your skin is too dark or too tanned. Furthermore,
The 2X3cm² TREATMENT SURFACE through which pulses of light are delivered is recessed inside the
LAMP CARTRIDGE at the TREATMENT SURFACE. This enables Silk'n SensEpil™ to protect your skin by
avoiding direct contact between the TREATMENT SURFACE and the skin.
Silk'n SensEpil™ protects your eyes: The Silk'n SensEpil™ APPLICATOR has a built-in safety feature for eye
protection. It has been designed so that a light pulse can not be emitted when the APPLICATOR is facing
open air. The safety switch is activated only when the TREATMENT SURFACE is in contact with the tissue.
5