Selecting A Server - Belkin OmniView SMB Mode D'emploi

Using the Remote IP Device

Selecting a Server

The quick-access toolbar allows you to easily select and switch to any server
connected to the Switch or daisy-chain configuration.
To connect to a different server:
1.
In the quick-access toolbar, click
list of connected servers will appear (see Fig. 20). If a serial device is
connected to the IP Device, it will also appear on the list.
2.
Select the desired server or serial device. The screen of the server or the
serial-device window will appear.
Note: If security is enabled on the KVM switch, remote switching will not be
allowed through the quick-access toolbar.
Fig. 20 Server-Selection Menu
or right-click
1
2
3
. A
4
5
6
7
8
9
UK-42