Performance Settings (Bandwidth) - Belkin OmniView SMB Mode D'emploi

Using the Remote IP Device

Performance Settings (Bandwidth)

You can adjust the bandwidth settings on the IP Device to give you the desired
compression and color-support levels for your remote sessions.
To change the bandwidth settings:
1.
In the quick-access toolbar, click on
box will appear (see Fig. 19).
2.
Select one of the following bandwidth options:
• Adaptive—Automatically adapts to the best compression and colors
based on activity.
• Low—Provides high compression and 16-color support.
• Medium—Provides medium compression and 256-color support.
Medium is recommended when accessing the Switch over an
Internet connection.
• High—Provides low compression and high, 16-bit color support. This
setting provides optimal performance when working on a LAN.
• Custom—Allows you to select your own compression and
color-support levels. Choose between Low, Medium, and High
compression, and 16-, 256-, and High (16-bit) color support.
3.
When finished, click "OK" to save the setting. The screen of the last
accessed target server will appear.
UK-41
Fig. 19 Performance-Settings Box
. The Performance-Settings