Serene House Fountain Mode D'emploi page 6

Light Setting Instruction
1. To switch on - press the light setting button and the built-in LED light will turn on.
2. 7 light color effectiveness - warm white, green, blue, red, yellow, purple and light
white.
3. Fix on a single light color - press the light setting button and the light color will be
fixed.
4. To switch off the light - keep pressing the light setting button and at the end of
7-light rotating cycle, the light will turn off.
08
ON 60 90 120
Light setting button
Time Setting Instruction
To set usage time of this Scentilizer
1. Press the power indicator button for continuous operation.
2. Press the power indicator button once for 60 minute operation. The 60 indicator
will go on.
3. Press the power indicator button twice for 90 minute operation. The 90 indicator
will go on.
4. Press the button 3x for 120 minute operation.
5. For safety purpose, this Scentilizer is programmed to stop operating
automatically when it detects the water is below its programmed level.
ON
Timer setting indicator
60 90 120
09