Product & Accessories - Serene House Fountain Mode D'emploi

Product & Accessories
• Please check if all following items are present and if there is any damage before use.
Spray hole
Glass cover
Control
panel
Timer setting
indicator
ON 60 90 120
Power Light setting
(ON / OFF) button
04
Lid
Vent
Atomizer
Water tank
Main
unit
Water mark
-MAX(90ml)
Power
jack
Ventilation
inlet
Operating Instructions
• Always place your Scentilizer on a firm, flat and level surface.
• Condensation may occur around the Scentilizer when operating in high humidity
environment.
1
Take off the cover to remove it from
the main unit. Remove the lid from
water tank.
3
Adapter
or
2
Plug the head of the AC adapter
into the power jack at the side of the
main unit.
Fill water tank to or below maximum (MAX)
water mark level. To avoid damage to this
device, never fill water exceeding its
maximum water mark level.
• After completing the water filling
procedure, please wipe off any excess
moisture on the water tank.
• Never add water into the vent hole.
Water Recommendations: Remark
05