Disposal Of The Product - Allmatic B.RO MINI 1CH Mode D'emploi

4
REMOVE A TRANSMITTER
1. Go near the receiver.
2. Press and keep pressed the hidden button of the transmitter you want to remove.
3. Without releasing the hidden button press the first button of the transmitter.
4. The LED on the receiver will blink 4 times. When the LED goes off, transmitter is removed.
Do not make this procedure if near other receivers/automations, this procedure will remove the transmitter
from every system into the range.
5
RESET
1. Cut power of the receiver.
2. Press and keep pressed the learning button of the receiver while giving power again.
3. When the LED goes off it is possible to leave the button. The receiver has been reset.
GUARANTEE
In compliance with legislation, the manufacturer's guarantee is valid from the date stamped on the product and is
restricted to the repair or free replacement of the parts accepted by the manufacturer as being defective due to poor
quality materials or manufacturing defects. The guarantee does not cover damage or defects caused by external
agents, faulty maintenance, overloading, natural wear and tear, choice of incorrect product, assembly errors, or
any other cause not imputable to the manufacturer. Products that have been misused will not be guaranteed
or repaired. Printed specifications are only indicative. The manufacturer does not accept any responsibility for
range reductions or malfunctions caused by environmental interference. The manufacturer's responsibility for
damage caused to persons resulting from accidents of any nature caused by our defective products, are only those
responsibilities that come under Italian law.

DISPOSAL OF THE PRODUCT

This product is an integral part of the automation, and therefore, they must be disposed of together. As for the
installation operations, at the end of the life of this product, the dismantling operations must be performed by
qualified personnel. This product is made from different types of materials: some can be recycled, others must be
disposed of. Please inform yourselves on the recycling or disposal systems provided for by the laws in force in your
area, for this category of product.
CAUTION! – some parts of the product can contain polluting or dangerous substances which, if dispersed
in the environment, may cause serious harm to the environment and human health. As indicated by
the symbol at the side, it is forbidden to throw this product into domestic refuse. Therefore, follow the
"separated collection" instructions for disposal, according to the methods provided for by local regulations
in force, or redeliver the product to the retailer at the moment of purchase of a new, equivalent product.
CAUTION! – the regulations in force at local level may envisage heavy sanctions in case of abusive disposal
of this product.
ALLMATIC S.r.l
32026 Borgo Valbelluna - Belluno – Italy
Via dell'Artigiano, n°1 – Z.A.
Tel. 0437 751175 – 751163 r.a. Fax 0437 751065
www.allmatic.com - E-mail: info@allmatic.com
6-1620051 rev6
ITA ENG
14/04/2021
FRA ESP NED
5/12