Allmatic B.RO MINI 1CH Mode D'emploi page 4

1
DESCRIPTION
Miniaturize receiver Rolling Code, 1 channel with dry contact relay output 1A a 30 Vdc / 0.5A a 42.4 Vac.
Power supply 12-24 Vac/dc, frequency 433.92Mhz.
SignalingLED
Learning button
Selector for
power supply
2
LEARNING OF TRANSMITTERS
1. Select the power supply with the jumper and power up the receiver.
2. Press the learning button. The LED will light up.
3. Press the button of the transmitter you want to memorize. The LED will blink 2 times for the correct learning.
Repeat the procedure to memorize other transmitters.
The receiver memorize only one button for every transmitter. In case of learning of a second button of the same
transmitter, the receiver will remove the first button learnt.
3
MODALITY AND SELECTION OF THE FUNCTIONING
The functioning modalities of the relay are two::
1. IMMEDIATE: the relay is active as long as the radio signal is it as well, and the relay output is closed as long the
transmitter button is pressed.
2. ON TIME: the relay, once activated, is active for a programmable time from 1 seconds up to 60 seconds.
In order of selecting the required functioning modality, proceed as follow:
1. Press and keep pressed the learning button for more than 10 seconds.
2. When the LED blinks fast, it is possible to release the button. In this moment the time is set to 0 seconds
(immediate functioning).
3. Press and release the learning button to increase the time of activation of the relay. Each time you press and
subsequent release, the LED blinks one time and the time is increased by 1 second, until a maximum of 60
seconds.
4. Press and keep pressed the learning button for more than 5 seconds.
5. When the LED blinks, it is possible to release the button. The time has been memorized.
During phase 3, after 20 seconds of inactivity, the receiver exits from the function, by timeout, without saving
settings and it will be set the immediate functioning.
4/12
B.RO MINI 1CH
Antenna
Radio module
12-24
Vac/dc
ITA ENG
Code
Max transmitters
Power supply
Consumption
Channels
Frequency
Unobstructed range
Relay contact
Temperature
*The range is influenced by the type of transmitter,
antenna and radio interferences
FRA ESP NED
6-1620051
Rolling Code
1000
12-24 Vac/Vdc
45mA dc - 85mA ac @12V
50mA dc - 100mA ac @24V
1 (immediate or on time)
433.92 MHz
80-250 m*
1A a 30 Vdc / 0.5A a 42.4 Vac
-10 ... +55°C
rev6 14/04/2021