INKBIRD IHC-200-WIFI Mode D'emploi page 13

the button to change the value, the value
will be saved automatically when you switch
to another menu item by pressing the
button.
Press and hold the button for 2 seconds
SET
to save settings and quit the setting mode,
the controller will also quit the setting mode
and turn to normal working mode if there's
no operation for 30 seconds.
5.2 Flowchart of the Settings
Press"SET"Key for over 2
seconds to enter parameters
setting mode
HS
50.0%RH
Humidity Setting
SET
Value
HD
5.0%RH
Humidification
SET
difference value
DD
5.0%RH
Dehumidification
SET
difference value
AH
Alarm High
SET
humidity Limit
AL
5.0%RH
Alarm Low
SET
humidity Limit
PT
0 Minute
Dehumidification
SET
Delay Time
CA
0.0%RH
Humidity
SET
Calibration
No Key for 30 seconds
or Presss "SET" key
over 2 second?
Working normally
12
SET