INKBIRD IHC-200-WIFI Mode D'emploi page 8

Then press "Add Home" button to create
your home.
Tap "+" or "add device" button in home
page of the APP to add the device.
Press and hold the
WIFI
seconds to reset the Wi-Fi when the
controller is under normal working state.
The controller will enter the Smartconfig
configuration state by default. You can short
press the button to switch between the
WIFI
Smartconfig configuration mode and the AP
mode.
As the WIFI module need time for data
processing, so it will take about 5 seconds
to display the corresponding LED symbol
and state if the Wi-Fi states change.
4.3 Quick Connection
(1) Plug the device in the socket and make
7
button for 2