Veripart VPKK701 Manuel D'utilisation page 33

After placing the appliance, leave it for at least 3 hours before
inserting the plug in the socket. First clean the interior of the appliance.
Use warm soapy water with, for instance, washing-up liquid, all-
purpose cleaner or soda. Wipe the inside of the appliance after
cleaning with clean water and properly wipe everything dry. Leave the
appliance to dry for 1 to 2 hours.
USE
The control unit of the appliance is located on the inside. Check that
the thermostat is on [ 0 ]. Check that the voltage corresponds with
the voltage stated on the information plate and insert the plug in the
socket.
Set the temperature with the thermostat and select a position between
1 and 7. We recommend setting the appliance to position 3 or 4. The
appliance will now cool continuously until the set temperature has been
reached. Allow the appliance to reach the set temperature, before
filling it with food. Usually this will take 2 to 3 hours. After that, you
can set the thermostat to the required position and fill the appliance
with food.
Position 1 = warm, lowest capacity
Position 7 = cold, highest capacity
If the ambient temperature rises, set the appliance to a higher position
in order to be able to guarantee the interior
temperature.
Set the thermostat to [ 0 ] to switch off the appliance.
3 0