Scope Of Delivery - Waeco MagicTouch MT2000 Instructions De Montage

MT-2000.book Seite 19 Freitag, 12. Mai 2006 4:55 16
MagicTouch MT2000
When the negative terminal of the battery is disconnected, all data stored in the
volatile memory will be lost.
The following data must be set again, depending on the vehicle equipment
options:
– Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the vehicle's operating
manual.
Observe the following installation instructions:
Secure the parts installed in the vehicle in such a way that they cannot become
loose under any circumstances (sudden braking, accidents) and cause injuries
to the occupants of the vehicle.
To prevent damage when drilling, make sure there is sufficient space on the
other side for the drill head to come out (fig. 1, page 3).
Observe the following instructions when working with electrical parts:
Only use a diode test lamp or voltmeter to test voltages in electric cables.
Test lamps with a bulb consume too much voltage, which can damage the
vehicle's electronic system.
When making electrical connections, ensure that:
– They are not kinked or twisted
– They do not rub on edges
– They are not laid through sharp-edged ducts without protection (fig. 2,
page 3).
Insulate all connections.
Protect the cables from mechanical wear (for example rubbing against existing
cables) using cable binders or insulating tape.
3

Scope of delivery

Quantity Description
1 Comfort indicator module
2 Connection cable
3 Diode
Fastening material
Scope of delivery
Item number
MT-2000
19