Mirolin BD 44 Manuel D'utilisation page 9

STEP 30: Finished Door Installation.
If the door leaks make sure that it was sealed with
clear mildew resistant silicone as specified in the
installation manual.
?
IF YOU HAVE A PROBLEM - READ OUR FAQ's FIRST:
Q. After I complete my installation the door do not track very well.
?
A. In order for the Two Panel Door to slide properly along the header the Wall Jambs must be
100% plumb vertically and the Sill level.
Q. After I complete my installation the door binds on the sill too much and does not track easily.
?
A. Remove the door panels from the header and examine the rollers position.
Adjust accordingly to raise the panels the required amount to glide easily.
Please call Mirolin Technical Assistance
Visit www.mirolin.com
Still can't solve your problem?
live representative: 1-800-MIROLIN
and click on FAQ's for a complete list
of troubleshooting tips
FIRST
and talk to a
9
26 Aug.14