Intended Use; Safety Precautions And Warnings - Novus J-171 Traduction De La Version Originale Du Mode D'emploi

1
Translation of the original
en
operating instructions
Read all safety precautions and
instructions.
Any failure to follow these safety pre-
cautions and instructions may result
in electric shock, fire and/or severe injuries and
consequences.
Keep these operating instruction in a safe place
for future reference.
Contents
1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1 Declaration of Conformity . . . . . . . . . . . . . . . . . . .2
1.2 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1.3 Safety precautions and warnings. . . . . . . . . . 10
1.4 Pictogram legend . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.5 Technical specifications. . . . . . . . . . . . . . . . . . . . 12
1.6 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . 88
2 Normal operation. . . . . . . . . . . . . . . . . . . . . . . 88
2.1 Opening magazine . . . . . . . . . . . . . . . . . . . . . . . . 88
2.2 Inserting fasteners. . . . . . . . . . . . . . . . . . . . . . . . . 89
2.3 Adjusting impact power . . . . . . . . . . . . . . . . . . . 89
2.4 Releasing the trigger, firing a shot . . . . . . . . . 90
2.6. Multistroke function for staples
and 30 mm nails. . . . . . . . . . . . . . . . . . . . . . . . . . . 90
3 Maintenance/Troubleshooting . . . . . . . . . . 91
3.1 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
3.2 Replacement parts list . . . . . . . . . . . . . . . . . 92/93
1.2

Intended use

This device is used for fastening cardboard, insu-
lation material, textiles, foils, leather, wood and
similar non-brittle materials to wood or wood-like
surfaces. Make sure the workpiece is appropriate
in size.
This device must only be used for the purpose
intended by the manufacturer.
10 / 96
Safety precautions and
1.3
warnings
This device has been manufactured and tested in
accordance with the applicable code of practice. It
left the factory in safe and proper working order.
To maintain this condition and ensure safe oper-
ation, the user must follow the precautions and
warnings given in the operating instructions.
• This device is not intended for industrial use.
• This device is not a toy and must be kept out of
children's reach.
• The device must always be checked for proper
working order before it is used.
• If it is to be assumed that safe use is no longer
possible, the device must be taken out of opera-
tion and prevented from being used inadvertently.
• Do not pull on the power cord or use it for carry-
ing the device. The device must not be operated
if the power cord is damaged.
• Manipulations, such as the removal or blockage
of parts on the device, are not permissible and
will result in the warranty becoming null and
void.
• Before switching on, make sure the power
source does not exceed the permissible values
given in the technical specifications.
• Do not aim the device at yourself, other persons
or animals.
• Only use genuine NOVUS fasteners.
• Tips and edges of fasteners being inserted
in the magazine, not driven all the way in or
becoming jammed in the magazine after a
malfunction can cause injury.
• As the tacker is only rated for short-time duty,
it should be allowed to cool down after 30
minutes when fired at a rate of 20 shots/min. in
single-stroke mode, and after 4 min. when used
in multiple-stroke mode.
• Protect from moisture and wetness.