Dalla Corte DC PRO Notice Pour L'utilisateur page 47

4. Use the navigation buttons (PD1) and (PD2) to
select the day to be programmed, then press the
ENTER button (PD3) to confirm.
5. Press ENTER (PD3) to program the switch-on
mode of boiler timer no.1. Use the navigation but-
tons (PD1) and (PD2) to select the boiler switch-on
time, then press ENTER (PD3) to confirm.
Use the navigation buttons (PD1) and (PD2) to
select the boiler switch-off time and then press
ENTER (PD3) to confirm.
Use the navigation buttons (PD1) and (PD2) to
select the boiler switch-off mode and then press
ENTER (PD3) to confirm.
By confirming timer no.1 set up, you automatically
access timer no.2 set up.
To set up boiler timer no.2, follow the same inst-
ructions given for timer no.1 set up.
Press navigation button (PD3) if you do not want to
program timer no.2.
The display will show:
Use the navigation buttons (PD1) and (PD2) to se-
lect the group you want to program, press ENTER
(PD3) to confirm and program timer no.1.
Once all units have been programmed for the
selected day, press ESC (PD4) to go back to the
weekly timer menu.
Use the navigation buttons (PD1) and (PD2) to se-
lect the day you want to program, press ENTER
(PD3) to confirm and program the timer as descri-
bed above.
At the end of the weekly programming, press ESC
(PD4) repeatedly until you get to the main menu.
47