Gewa CP14 Manuel D'utilisateur page 10

Model Description
18" Electronic cymbal with accessories
CP18-AC
18" Cymbal
1x
Stereo Cable 4,6 m (15 ft)
6,35 mm (1/4") Plugs
(Angled)
1x
4 A I
SSEMBLY NSTRUCTIONS
Cymbal assembly on stand
Figure 1
1
Screw cymbal seat (D) on an 8 mm cymbal arm (F).
2 Place the cymbal (C) on the cymbal seat (D), followed by the spin lock (B).
3 Orient the spin lock (B) in the cymbal mold as shown in Figure 3.
With the spin lock attached, orient the whole cymbal with the "G" facing in playing position.
4
5 Secure the cymbal seat (D) by fastening screw (E) as shown in Figure 1.
6
Screw felt and wing nut (A) onto the cymbal arm.
E-Cymbal Seat
1x
Figure 2
CP14 | CP14-AC | CP18 | CP18-AC - Owner´s Manual
Spin Lock Wing Nut with Felt (8 mm)
1x
GEWA Order N°
GD835228
1x
Figure 3
7