Use And Maintenance - Philips EUROM IKP30-IPX4 Manuel D'utilisation

The insect-killer uses no chemicals or sprays, does not emit smoke
or odours, produces no waste and is environmentally friendly.
The IKP30-IPX4 insect-killer is designed to be used indoors, in the
home, in work areas, retail outlets, etc. Because it is waterproof
(IPX4) also suitable for use in stables, washrooms, etc.
Operating principle
The insect-killer is designed to attract flying insects, such as flies,
moths, mosquitoes, etc. using ultraviolet light. As they fly towards
with light, they fly into an electrified metal screen that electrocutes
them.
Installation
When placing and installing the insect-killer, it is important to take
the location of the device in the room/space into account.
1. Hang the insect-killer centrally in the location; that way, the
ultraviolet radiation can be dispersed better and attract insects
from the entire area.
2. Hang the insect-killer or a wall or in a corner if the room/area is
not very large.
3. The best height for the insect-killer is 1.5 to 2 metres off the
ground, which is the most common flying height for insects.
4. Specifically for mosquitoes, though, you can hang it a little lower,
at a height of about one metre.
5. The insect-killer can be suspended from the chain or placed on a
surface such as a table or cabinet. Make sure it is on a good
stable base.
6. Install your insect-killer in a relatively dark place: not in direct
sunlight (windows, doors), because bright sunlight weakens the
insect-killer's radiation power. Artificial light does not weaken the
radiation, but makes it work less well.

Use and Maintenance

Using for the first time
Make sure that the power socket you intend using is earthed and the
correct voltage (220-240V-50Hz). Start the insect-killer working by
10