Installation - Danfoss Link PR Plug-In Relay Guide D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Installation Guide

Installation

The Danfoss Link™ wireless system's transmission range is
sufficient for most applications; however each building has
different obstacles affecting communication and maximum
transmission distance .
If communication problems occur Danfoss suggests that
accessories would be required to support the system, such as
repeaters . In exceptional cases the wireless system may not be
suitable for your installation .
Please be aware of the following, when installing Danfoss
Link™ PR:
Installation and placement must be according to
local building regulations.
Operation mode
Danfoss Link™ PR supports two types of operation modes:
1 . ON/OFF switching.
2 . Heating regulation (when using Danfoss Link™ PR as heat-
ing regulation in a room you also have to install a Danfoss
Link™ RS) .
Note! Do not install electric floor heating system without
a floor sensor, when the heating element is installed on or
beneath wooden surfaces and other surfaces sensitive to
temperature!
6
Danfoss Link™ PR
VISGY45X
© Danfoss
04/2011

Publicité

Table des Matières
loading

Table des Matières