- CANCEL and confirm with
Close any open doors/windows and check the events memory. If the messa-
ges still appear, contact the installer.
DEACTIVATION: proceed in the same manner as for "activation"; once the
system is activated, the new key reading will deactivate any associated zones.
5.3 - System status visualisation
Switching on the touchscreen display allows for viewing on the main window
the single zones activated.
system deactivated
zone A activated
The main window also includes information on the following:
•
GSM signal level
GSM dead zone
•
Touchscreen battery level
Battery charged
The image
indicates an important warning. Check the events list
and, if necessary, contact the installer if the message persists.
The images
and
indicate anomalies in the system's operation. In this
case, if the anomaly persists contact the installer.
5.4 - Deactivation of the alarm under threat (anti-coercion)
If the alarm is deactivated through the touchscreen keypads by entering the
specific "anti-coercion" code, the alarm deactivates and, simultaneously, the
specific telephone calls in case of theft are automatically dialled.
5.5 - Panic function
In case of emergency, it is possible to activate all the sirens and calls to the
stored number by pressing the
to exit without activating the system.
system activated
zone B activated....
GSM signal excellent
Battery completely flat
button on the remote control (if enabled on
the control unit – verify with the installer), or by switching on the touchscreen
and pressing the icon
and – on the next window – the icon
2 seconds.
5.6 - Residual credit verification (only on versions HSCU2GC
and HSCU2GW)
If a rechargeable SIM card is used, the residual credit can be checked directly
from the touchscreen.
01. Enter the alarms menu by clicking on the icon
cking on the arrow
and touch
A message occupying the entire screen will appear with the text of the SMS
received by the relevant telephone operator.
for roughly
. Scroll the icons by cli-
.
English – 13