Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
14
Timer 01
In the next screen, set:
"Event Type " to select Scenario, Group or Automation Unit;
"Name" to write the name of the scenario, group or automation unit to run;
"Command" to define the specific command to be sent for the type
events: "Group" and "Automations".
03. Confirm with "OK".
Then set:
"Time" to define the event execution time;
"Days" to define the event execution days;
"Pre-alarm" to set the reminder time related to the event;
"Voice Msg" to record a voice message that will be played as reminder.
04. Confirm with "OK".
10 – English
Name
Enabled
Event
Type
Name
Command
Time
Days
Pre-alarm
Voice Msg.
4.15 - Notice management
15
Notice 1
This function is available only if the touch screen is associated with the alarm
central unit HSCU2C or HSCU2GC (see paragraph 5.2) and if the function
"Notice management" is enabled (see paragraph 5.2.2).
Up to 10 programmes can be managed which, depending on a certain event
notified by the alarm control unit to the touch screen keypad, cause the execu-
tion of a scenario, an individual command or group of commands.
Caution – If this function is enabled, the touch screen with rechargeable bat-
teries must be used with the HSTSA1 battery charger provided separately.
For the configuration, follow the steps below:
01. Turn on the touch screen keypad and touch the icon (fig. 15)
main screen;
02. Scroll through the icons using the scroll bar to the side
03. Touch the icon "Notices"
04. In the appearing screen, press the title of the field to be set (scroll through
with the side arrows
to select the other fields to be set).
Name: to assign a name to the Notice;
Enabled: select "YES" to enable the Notice, "NO" to Disable it.
Event: enter the installer code or the user code and select the event to
which the "Notice" is to be associated from table 2.
If the "Open fixtures" event is selected, a new window appears with the
list of all the sensors acquired in the alarm system. Select the sensor to be
associated.
Name
Enabled
Event
Notice
Type
Name
Command
ON
OFF
Days
Voice Msg.
;
and select one from the list;
in the
Publicité
Table des Matières
