The Fountainhead Group 180551 Manuel D'utilisation Et D'entretien page 4

G
Figure 1. Features & Control
A. Mesh Burner Cover
B. Auto-Ignite Button
C. Trigger
D. Insecticide Reservoir
Preparing Your Fogger For Use
(Refer to diagram above)
Attaching the Propane Cylinder
NOTE: Use either 14.1oz "Tall" style or 16.4oz "Short" style propane cylinder - propane is sold separately.
1. Always inspect the threaded outlet of the propane cylinder and remove any debris before attaching.
2. Make sure the propane valve (E) is completely closed before attaching the propane cylinder (turn the
propane valve fully clockwise).
3. Insert the cylinder into the rear of the fogger (F).
4. To avoid damage, be sure to properly align the threads of the propane cylinder with the threads of the
fogger. Turn the propane cylinder clockwise to tighten.
5. Hand tighten only. Over tightening propane cylinder may damage cylinder or fogger.
Filling the Insecticide Reservoir
NOTE: Use only Black Flag® Formula 2, Cutter® or Repel® Fogging Insecticide (as indicated
on carton).
The use of other insecticides in the fogger can result in damage to the fogger or harm to the user. Do not use
emulsifiable concentrates or other materials that are designed to be mixed with water. The use of other
insecticides can clog the vapor coil of your fogger, making it unsafe or inoperable, and will void the
warranty.
1. Your fogger is equipped with a fill spout and large insecticide reservoir (D).
2. Be sure the burner is not lit and the fogger is cool before filling the insecticide reservoir (D).
3. Place the fogger on a flat, level, non-combustible, outdoor surface.
4. Do not overfill the reservoir. Insecticide may stain clothing and/or may be harmful to grass or foliage.
5. Be sure to secure the reservoir cap before use.
ASSEMBLY INSTRUCTIONS
C
B
E. Propane Valve
F. Propane Attachment Area
G. Nozzle
OPERATING INSTRUCTIONS
E
F
D
A
Page 4