Installation; Installing Hdd - Eneo IER-28R040005A Guide D'installation Rapide

Installation

Installation
This chapter describes the way to install NVR.
When installing a device, connect rear of the device with each port on the basis of below
connection map.
The device starts first like below sequences:

1. Installing HDD

2. Connecting with an exterior device
3. Starting a system
4. Setting a quick setup
Installing HDD
How to install HDD in the device:
CAUTION:
1. Always switch off and unplug the unit.
2. Unscrew with a screw driver (+) and open the unit cover.
8
• Withdraw the mains plug before installing HDD to reduce
the risk of injury or electrical shock, or device malfunction.
• Make sure to check the compatibility of HDD with the
device.