Network - Eneo IER-28R040005A Guide D'installation Rapide

• Language: Select system language.
• Device Name: Enter the device name.
• Keyboard ID: To identify device usages in controlling NVR with RS485 through a
keyboard
• Selecting the device ID. In case of simultaneous use of equipment, set ID with
difference.
• HDMI / VGA: Set resolution of a monitor connected to the device.
i Notice: When using many NVRs, set different IDs.
i Notice: Video is not displayed through VGA port if set 3840x2160 resolution. If reso-
lution is set to 3840x2160 and a monitor that does not support this resolution is connect-
ed to the HDMI port, it will automatically change to 1024x768 resolution.
2. Press Save button to save set value.
3. Press Next to end System setting and move the next setting phase.

Network

How to set the Network of Easy Installation:
1. Set each item in Network setting screen.
• WAN Port: Select whether to use static IP or dynamic IP.
• IP Address, Subnet Mask, Gateway, DNS, and Port: As for dynamic IP, enter informa-
tion in each space.
2. Press Save button to save set value.
3. Press Next to end Network setting and move the next setting phase.
12