ASROCK H370M-ITX/ac Mode D'emploi page 27

Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 9)
(SATA3_1:
see p.1, No. 8)
(SATA3_2:
see p.1, No. 11)
(SATA3_3:
see p.1, No. 10)
(SATA3_4:
see p.1, No. 16)
(SATA3_5:
see p.1, No. 17)
USB 2.0 Header
(9-pin USB_3_4)
(see p.1, No. 13)
USB 3.1 Gen1 Header
(19-pin USB3_6_7)
(see p.1, No. 7)
Front Panel Audio Header
(9-pin HD_AUDIO1)
MIC2_L
(see p.1, No. 20)
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
1
MIC2_R PRESENCE#
OUT2_R MIC_RET
J_SENS E
OUT2_L
OUT_RET
These six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
*If M2_1 is occupied by a SATA-
type M.2 device, SATA3_1 will
be disabled.
There is one USB2.0
header on this
motherboard. This USB
2.0 header can support
two ports.
There is one header on
this motherboard. This
USB 3.1 Gen1 header can
support two ports.
This header is for
connecting audio devices
GND
to the front audio panel.
H370M-ITX/ac
23