Durolux Series; Remote Travel Adjust Function - SR Suntour DUROLUX TAD 20QLC 1.5 Mode D'emploi

SR SUNTOUR - OWNERS MANUAL
Thread the cable through the outer casing
stopper and through the cable clamp.
Tension the cable slightly and fasten it
using a 2 mm Allen key
Cut the cable to a proper length. Approxi-
mately 12mm is recommended.
Install a cable end cap at the end of the
cut cable using a needle nose plier

REMOTE TRAVEL ADJUST FUNCTION

The travel adjust function of your fork enables you to change the travel of your fork in a range
of 40mm. SR SUNTOUR's travel adjust works stageless, therefore you can choose every travel in-
between your fork's maximum and minimum travel. The travel adjust cartrige itself works with
an pneumatic system. While changing the travel air will get transferred from one chamber to the
other. Usually the air valve(air pressure adjust) is located at the right side of the fork's crown. Be-
cause of the travel adjust system, the air valve cap sits at the lower end of your bottom case.
8
English
Press the Travel Adjust Lever down-
wards and hold it. Compress your
fork. Release the lever again. Disbur-
den your fork.
DUROLUX / DURO FR20 / DURO
1.5 mm
0.5 Nm
CUT
12mm
DUROLUX TAD SERIES
Press