Olimpia splendid B0921 Instructions D'utilisation Et D'entretien page 10

EN
10
CONFIGURATION OF THE THERMOSTAT
The configuration menu allows to set the operating characteristics of the thermostat according to the system or per-
sonal needs.
- Switch off the thermostat ("OFF" is displayed).
- Keep the "Mode" key (14) pressed for approximately 5 seconds; you enter the configuration menu.
- Set the desired value with the "arrow" keys (15 and 16).
- Press the "Mode" key (14) to switch to the next parameter or the key "Fan" (13) to return to the previous one.
- Press the on/off key (12) to exit the configuration.
- To restore the factory settings, keep button "Mode" (14) pressed for approximately 5 seconds; the message "DEF"
appears on the display.
If no key is pressed within 30 seconds, display backlighting lowers to the value set in the field "bL" (from "0" to "50%").
When exiting the configuration mode, the changed parameters will be saved automatically.
N. Keys
"OFF"
5 seconds
1
2
3
4
5
6
7
8
10
Display Range
CL -4,0°C ÷+4,0°C
AH
20°C ÷ 35°C
AL 5°C ÷ 18°C
bL 1 ÷ 50%
rE
rE / rD
PP
OO / PP
CH CO / CH
OFF / 2 / 10 /
RES
100
Description
Temperature adjustment
Maximum settable temperature
Minimum settable temperature
Display backlighting
(in "low consumption" mode)
rE - In case of power failure, the thermostat
saves its status (ON or OFF) into memory.
rD - In case of power failure, at restart, the
thermostat will be set to OFF.
PP - Protects the valve/pump in case of
inactivity for a long period of time: every
7 days the valve switches on for 15
seconds.
OO - Function disabled
Mode selection:
CO - Cooling only
CH - Cooling and Heating
OFF= no water temp. sensor
2: NTC - 2K
10: NTC - 10K
100: NTC - 100K
External sensor: water temp. ONLY (no air)
Default
0°C
30°C
16°C
20
rE
PP
enabled
CH
OFF