EGO RBA2100 Guide D'utilisation page 22

REPLACING THE RUBBER PADDLE BROOM
WARNING:
time use which may cause dangerous projectiles. Thrown objects can cause serious
injury. Inspect it regularly and do not operate the rubber broom with a worn or damaged
parts.
11
To Remove
1. Wear the gloves.
2. Remove the hitch pin from the end of the drive axle (Fig.11).
3. Pull the rubber paddle broom off the drive axle.
4. If the drive axle is damaged, remove the lock pin from the hole of the drive axle
and pull the drive axle off the driven shaft (Fig.12).
12
22
RUBBER BROOM ATTACHMENT — RBA2100/RBA2100-FC
A damaged rubber paddle broom may break into pieces after long-
Slide Binding Bar
Drive Axle
Driven Shaft
Lock Pin
Rubber Sweeper
Slide Binding Bar
Hitch Pin
Drum