EGO RBA2100 Guide D'utilisation page 20

Thrown materials may seriously injure the operator or bystander. To reduce the risk of
personal injury, it is essential to take the following precautions:
◾
Always hold the rubber broom with both hands when operating. Use a firm grip on
both handles.
◾
Move the rubber broom to the work area before starting and start the rubber
brush at a lower speed.
◾
To reduce the risk of injury from loss of control, hold and guide the rubber broom
at a shallow angle. If the rubber broom is held at too steep an angle, it tends to
push back towards the operator.
Before each use check for damaged/worn parts
Check the rubber broom, guard, front-assist handle and drive axle and replace any
parts that are cracked, warped, bent, or damaged in any way.
Clean the rubber broom after each use
See the Maintenance section for cleaning instructions.
WARNING:
battery is removed off before cleaning or servicing the rubber broom ilure to comply
could result in possible serious personal injury.
TO START/STOP THE TOOL
See "STARTING/STOPPING THE POWER HEAD" section in the power head PH1400/
PH1400-FC operator's manual.
20
RUBBER BROOM ATTACHMENT — RBA2100/RBA2100-FC
Ensure the rubber broom have come to a complete stop and the