djive FLoWMATE ARC Mode D'emploi page 9

ATTENTION
Place the appliance on a firm, dry, flat and waterproof surface.
Do not install the appliance in a hot, wet or very humid environment.
Never place the appliance or parts of the appliance in the vicinity of strong
heat sources and hot surfaces (e.g., heating, oven, and grill).
Do not place the fan in a narrow place, a corner or in narrow areas between
furnitures. Allow sufficient space around it so that the air can circulate fully.
The appliance becomes very hot during operation. Therefore, do not touch
the hot surfaces of the appliance during operation and for a short time
afterwards.
Wait until the appliance has cooled down before transporting it.
Do not spray air freshener into the airflow.
Do not place the appliance in front of an automatic air freshener system.
Always turn off the power button at the control panel and wait for it
to stop running before unplugging it from the power socket.
Do not put objects into the openings
or ventilation grilles.
Keep the appliance free from dust,
hair and above all, anything that
could restrict the airflow.
9