Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Heating mode

Press the
button to turn on the heating mode. The display shows the
ambient temperature. Increase ( ) or decrease ( ) the temperature setting.
After not pressing any button for 5 seconds, the setting is saved.
When the set temperature is higher than the ambient temperature,
the heating function is turned on;
When the ambient temperature reaches the set temperature, the heating
function will stop and the device will continue to run for 40 seconds and stop.
After 9 hours of continuous operation in heating mode, the machine will auto-
matically stop running. You can restart the device if you wish.
Note:
The default setting temperature is 25.℃
The device can not display ambient temperatures below 0° and will
simply show a value of 01.
While starting up the heating mode, only the left side of air outlets
will be heating initially. After 20 seconds, both sides will operate.
Set temperature
Ambient temperature
17

Publicité

Table des Matières
loading

Table des Matières